2014 subaru forrester fob

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138286
Printed Date: April 29, 2024 at 5:11 PM

Topic: 2014 subaru forrester fob

Posted By: prdjr165
Subject: 2014 subaru forrester fob
Date Posted: January 17, 2015 at 7:36 PM

Does anyone know if the keyless buttons on the factory remote work with the engine running ?
I am trying to see if I can use a one button starter on this 2014 Forrester non push start.

Replies:

Posted By: pentavolvo
Date Posted: January 17, 2015 at 7:40 PM

Should work

Posted By: Mark Mizenko
Date Posted: January 17, 2015 at 11:22 PM

Yes.

2 starter wires.

Posted By: prdjr165
Date Posted: January 18, 2015 at 5:34 AM

ok - thanks...

Posted By: Chris Luongo
Date Posted: January 18, 2015 at 9:06 AM

Yes it'll work.

Be sure not to trigger keysense during remote start. (If the car sees keysense, the oem remotes won't work.)

Also, not sure what you're using for a bypass. Key in a box should be ok. If you're using an ALCA or FLCAN, you might end up having to disable the factory alarm. (The procedure is in the car's owner's manual.)

Posted By: prdjr165
Date Posted: January 18, 2015 at 7:27 PM

I am using an idatalink blade-al and it shows to connect the keysense wire.I guess I'll have to See what happens.

Posted By: beegbie
Date Posted: January 18, 2015 at 8:14 PM

The wire from the idatalink harness is an input not an output. You should be fine.

Print Page | Close Window