Hi
Plz can someone tell me how to fix a transponder by pass as I am fitting a compustar alarm and the car has immobilser in it already. The instrustions on the bypass is as follows
Open case > put key inside case ( i dont understands what key is mentioned here)
then putone wire to power and one to remote start sensing (-) and then put the plastic cover on the key cylinder and put the keyattena to the cylinder also
Is the key they are on about possible the antenna key?? and where do u pu it inside of that box
Thanks
-------------
There is only one life > The afterlife
The key it is the CAR KEY , the one that you put in the contact to start the car ! :)
You will need to have a one of the car's key in the box all the time.
Why dont you get a DEI unit....it's a transponder immobilizer bypass unit...but keyless
HI there where can I get a DEI unit from and how do they work as i know the way the compustar transponder by pass works
Also on some immobilsers the contact wiht the key is not required. When u press the buttons to unlck the doors this disarms the immob but would thre be any probs in installing the compustar??
-------------
There is only one life > The afterlife
What make, model & year car is this ? You can use a universal bypass module that requries a couple of wires to hook up . The (-) wire that you need is called the GROUND OUT WHEN RUNNING wire fromthe Compustar. This wire only engages when the remote starter is activated, otherwise it rests at nothing.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
HI its a volkswagoin golf MK4 1999
I have compustarbypass module which it tells u to put the car key in there is this ok ??
-------------
There is only one life > The afterlife
Yes, place the key in the module and hook up the appropriate wires.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA