autopage brainfart, won't go into programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138399
Printed Date: May 11, 2024 at 6:00 PM
Topic: autopage brainfart, won't go into programming
Posted By: raverx3m
Subject: autopage brainfart, won't go into programming
Date Posted: February 02, 2015 at 10:56 PM
im installing rs6652way remote start autopage and got everything hooked up.
the valet button works
everything looks to be connected
when I try to learn tach it wont go into programming mode
I cycle the ignition 3 times and press 11 times and hold but it doesn't chirp damn it lol
I just want it to chirp
this car is a bit funky its a 93 civic that possibly had dash harness replaced because it has the door lock plug above fuse box that is not going anywhere. and some wires don't match
it has WHITE/ black wire that seems to be ignition2 on integra but not on civic. and it acts like an accessory. no voltage during cranking.
everything else works on the alarm I tested all other wires
Replies:
Posted By: tedmond
Date Posted: February 03, 2015 at 7:05 AM
Check door trigger and verify that you did get an ignition wire. If you accidently got the Acc try programming but using Acc Only. If it works move the wire
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|