1990 Nissan 300zx, Keyless Entry, Remote Start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138426
Printed Date: May 16, 2024 at 6:12 PM
Topic: 1990 Nissan 300zx, Keyless Entry, Remote Start
Posted By: noob101
Subject: 1990 Nissan 300zx, Keyless Entry, Remote Start
Date Posted: February 05, 2015 at 3:20 PM
ok..Connecting a keyless entry and remote start to a 1990 Nissan 300zx, previously installed was a Viper alarm and remote start that we removed. We are now installing an excalibur al-1851-edpb with 2-way pager.
ISSUE: Lock and unlock will not work to save my life, 2 relays are installed, i hooked the set up to a power inverter and tested the set up, and it worked perfectly. but once its installed in the car wont work at all. All wires are connected and working, power is going everywhere it should and grounds are in place. Any help here? maybe i missed a wire or something this is the first time i installed in an older vehicle.
Replies:
Posted By: tedmond
Date Posted: February 05, 2015 at 5:28 PM
That year aftermarket actuators have to be added. The system is a 2 wire reverse polarity
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: howie ll
Date Posted: February 05, 2015 at 6:01 PM
Driver's door only if it's the same as UK spec.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: djrico724
Date Posted: February 07, 2015 at 3:12 PM
From what I remeber you one need one actuator in drivers door wired for five wire revers polarity
Posted By: howie ll
Date Posted: February 07, 2015 at 3:46 PM
You remember correctly. OP, add a DEI 451. There's either one of those or two relays firing an existing aftermarket actuator installed with the earlier Viper.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|