Concept 400 in a Camper Van
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138466
Printed Date: May 14, 2025 at 10:19 AM
Topic: Concept 400 in a Camper Van
Posted By: helmutp
Subject: Concept 400 in a Camper Van
Date Posted: February 10, 2015 at 1:34 PM
Hello,
sorry for my bad english letter,
we have a Clifford Concept 400 installed in the camper van.
I think, the Installation is not made correctly.
If the starter battery is unconnected, the control panel have a measurement of 13,5v. This value is a backstream from the Alarm System.
I want now to switch the connections of this Concept 400 and need for it a wiring plan or an Installation guide. How or where can I get a plan or a manual for it.
Thank you for your Assistance.
Replies:
Posted By: howie ll
Date Posted: February 11, 2015 at 6:32 AM
There might be a back battery for the alarm or siren giving you that voltage. I had a 400 twenty years ago but I can't remember.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: helmutp
Date Posted: February 11, 2015 at 7:19 AM
Hello,
thank you for the Information, I think it is a hidden battery and I must search for it.
My first idea was this back flow came from a big capacitor.
bye and have a nice day
|