Viper 5706v, 2011 Nissan Rogue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138471
Printed Date: May 11, 2025 at 2:12 AM

Topic: Viper 5706v, 2011 Nissan Rogue

Posted By: jstolk2
Subject: Viper 5706v, 2011 Nissan Rogue
Date Posted: February 11, 2015 at 4:23 PM

In about an hour, I'll be attempting to install a Viper 5706V into a 2011 Nissan Rogue. It does not have the Intelli key. I have a DBALL which I have flashed for the Nissan firmware. I have never done a car this new before. I have never used a DBALL before. Anyone have any tips/pointers/concerns for me before I get started? I'm planning on using D2D.

Replies:

Posted By: jstolk2
Date Posted: February 11, 2015 at 7:12 PM

I'm at a point in the DBALL installation that says to find the "data" and "clock" on the NATS Antenna Connnector. I have no idea what that is. Any Help???

Posted By: kreg357
Date Posted: February 11, 2015 at 7:24 PM

You are looking for a White, 4 Pin connector at the ignition switch barrel. Should be Green and Brown wires.

-------------
Soldering is fun!

Posted By: jstolk2
Date Posted: February 12, 2015 at 8:08 AM

Thank you. Ended up finding it. Everything worked out great. Pretty easy install once I found everything.

Print Page | Close Window