05 Caravan Remote Start w/Dball2, Avital 4103

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138501
Printed Date: May 15, 2025 at 3:48 PM

Topic: 05 Caravan Remote Start w/Dball2, Avital 4103

Posted By: uchoward
Subject: 05 Caravan Remote Start w/Dball2, Avital 4103
Date Posted: February 17, 2015 at 12:00 PM

hi, Im installing , an avital 4103 remote start with a dball2 bypass on the xpresskit instructions (intallation type 1) ,i'm a bit confused with the ignition input + is that the pink heavy wire from the 6 pin connector ? or is it one of the status output wires or is this a typo error? also neutral safety has to be used or grounded in order for this unit to work? I have most of the wires hooked up but did not work ( im thinking because the neutral safety was not hooked up). Im using the d2d option . thanks for all the help.

-------------
CH

Replies:

Posted By: kreg357
Date Posted: February 17, 2015 at 7:09 PM

If you are going D2D between the Avital and the DB-ALL2, all of the dashed Blue lines are handled by the
D2D connection. That would mean that the 4103 thick Pink would go to the Caravan's Pink/White Ignition1
wire at the ignition switch connector but the Pink (+) Ignition at the DB-ALL2 would be made via D2D.

Assuming that your van has an automatic transmission, the 4103's Neutral Safety wire would go to Chassis
Ground.

-------------
Soldering is fun!

Posted By: uchoward
Date Posted: February 17, 2015 at 7:34 PM

Ok , so I guessed it right , just wanted to make sure.Thanks.

-------------
CH

Print Page | Close Window