2015 GMC Stand Alone, EVO-GMT3
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138625
Printed Date: June 01, 2024 at 1:00 PM
Topic: 2015 GMC Stand Alone, EVO-GMT3
Posted By: ziggyb222
Subject: 2015 GMC Stand Alone, EVO-GMT3
Date Posted: March 09, 2015 at 8:20 AM
Anyone out there with any experience doing a GMC Sierra 2015 with the EVO-GMT3. Any help would be great!!!!!!
Replies:
Posted By: tedmond
Date Posted: March 09, 2015 at 11:50 AM
Haven't used the stand alone, but have done a loaded compustar + blade. You have to hardwire locks if it doesn't have on-star. other than that pretty straight forward.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: ziggyb222
Date Posted: March 09, 2015 at 2:56 PM
Did you use the lt GREEN/ grey parking light wire in the white plug at the BCM???The Stand Alone is very easy to do...just had a issue with the parking lights..
Posted By: tedmond
Date Posted: March 09, 2015 at 5:11 PM
Yes i did. whats the parking light issue? if you're getting headlight flashes randomly, i've encountered it before as well
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: ziggyb222
Date Posted: March 09, 2015 at 9:07 PM
I am a little confused... In auto the lt GREEN/ grey wire shows 12 volts..when I turn on the switch for park lights...just the parklights come on..but that wire still shows 12 volts...shouldnt that show 0 after the lights are on???
Posted By: tedmond
Date Posted: March 09, 2015 at 11:49 PM
it's a low current negative. how are you testing?
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: ziggyb222
Date Posted: March 10, 2015 at 6:03 AM
With my meter... It didnt seem when I switched the parklights on..it changed..now if I turn the switch all the way to the left...like to turn off the Auto lights...the voltage dropped to zero...
Posted By: tedmond
Date Posted: March 10, 2015 at 9:02 AM
parking lights can also be grey same plug. Red to constant, black to parking wire. should show 12 on meter
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: ziggyb222
Date Posted: March 10, 2015 at 7:51 PM
Okay thanks!!! My buddies truck...3X to start works great...T-Harness to the Evo All and then lock,unlock,parklights and I use the Valet switch and hood pin...Super easy at the BCM...I will get the truck this weekend... Thanks for the help!!!!
|