Print Page | Close Window

Trunk output to Trigger Start In

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138645
Printed Date: May 03, 2025 at 12:28 AM


Topic: Trunk output to Trigger Start In

Posted By: xmentalcasex
Subject: Trunk output to Trigger Start In
Date Posted: March 11, 2015 at 5:02 PM

I have a CM7200 installed with the EXGO accessory and the EZGO has the ability to release a trunk, but not remote star. My car does not have a trunk release, so I am looking to connect the trunk output to the trigger start input.

After looking at the diagram the trunk out put is negative and the trigger start in is positive. Do I have to covert the negative output to use it with the positive input?



Replies:

Posted By: tedmond
Date Posted: March 11, 2015 at 7:27 PM
the trunk output is positive on the large gauge harness. GREEN / WHITE assuming you have not used it for parking lights or starter2

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert


Print Page | Close Window