2011 highlander limited remote start wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138660
Printed Date: May 02, 2024 at 8:53 PM

Topic: 2011 highlander limited remote start wiring

Posted By: vernk
Subject: 2011 highlander limited remote start wiring
Date Posted: March 14, 2015 at 8:17 AM

I'm stuck, I can't find any reference to the 2011 model that works.

2011 Toyota Highlander Limited with Smart Key

My remote starts pink wire needs to be pulsed negative x3 to actuate remote start. Please help me find where to hook into for that.
thanks! !!! I'm Sokol lacking a good reference for the lights ando tach but this punk wore is keeping me from the actual remote startin action.

ThanKS in advance!
V

-------------
Vern

Replies:

Posted By: Chris Luongo
Date Posted: March 14, 2015 at 9:24 AM

Sure helps to mention what you're installing.

But you can have the car's doorlock motor wire (which is positive) trigger a relay, and the relay can be configured to apply a ground to the wire on your remote starter. This site has a good section about relays to learn how to wire it up.

Posted By: vernk
Date Posted: March 15, 2015 at 8:53 AM

sorry, rs1050. remote start. thx

-------------
Vern

Print Page | Close Window