04 Suburban, XK01 Remote Start, Door Lock Issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138700
Printed Date: April 28, 2024 at 7:24 AM

Topic: 04 Suburban, XK01 Remote Start, Door Lock Issue

Posted By: jorgefdz
Subject: 04 Suburban, XK01 Remote Start, Door Lock Issue
Date Posted: March 21, 2015 at 9:18 PM

CAR: Chevy Suburban 2004
Alarm system : Avital 5303
Bypass Module: XK01 - AMDL 6.0

XK01 Connected thru D2D
So this mean I have connected D2D harness and Violet DATA (at the beginning).
because It didn't work... I finished hooking up also Door Lock and Unlock, Ground when Running and 12V & GND for W2W harness.

I thought I programmed correctly the first time to the type 4 it means suburban 2004.

I tried to remote start but it dies immediately.
Door Lock and unlock does not work neither.

I tried to reset the XK01 going to the 8 slow flashes, but cant reset it. I can not select the option no.2 that means reset (Unlock button at the avital remote).
I tried direct ground as I read in other Post, but cant not reset it.

I want to reset it, just in case I did not programmed correctly for my suburban.

any help will be appreciated...

-------------
J.F.L.L.

Replies:

Posted By: kreg357
Date Posted: March 22, 2015 at 8:03 PM

Not a big user of XresssKit modules ( especially the XK01 ) but if all else fails you could try using the XKLoader cable to flash it to something else and then back to AMDL firmware. That should get you back to a fresh unit.

-------------
Soldering is fun!

Posted By: jorgefdz
Date Posted: March 24, 2015 at 4:51 PM

I tried to re-flash using the XKLoader but I notices that I cant use it anymore if you are not a dealer/member at expresskit web site, is this correct?

-------------
J.F.L.L.

Posted By: kreg357
Date Posted: March 24, 2015 at 5:41 PM

I don't think so. I just plugged in the XKLoader2 cable with an XK01 attached and went to https://www.directechs.com/ .
It recognized the XKLoader ( upper right XpressVIP 4.5 box ) and showed the Platform 1 module with AMDL V6.00 firmware.
I wasn't logged in. You should be able to do everything except "Key-to-Go" as a non-dealer.

-------------
Soldering is fun!

Posted By: jorgefdz
Date Posted: March 25, 2015 at 11:38 AM

You are right, I can do that.
But where is the option to reflash it on the webpage?
Thanks.

-------------
J.F.L.L.

Posted By: tedmond
Date Posted: March 25, 2015 at 1:04 PM

once you start xpressvip, it should detect your loader + bypass. Then you can flash by vehicle or firmware

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: el ranchero
Date Posted: March 25, 2015 at 9:06 PM

i say boycott xpress for doing this

-------------
rocker

Posted By: kreg357
Date Posted: March 25, 2015 at 9:44 PM

For this vehicle, the Fortin INT-SL+ is excellent. Can't go wrong with iDatalink, either.

-------------
Soldering is fun!

Posted By: tedmond
Date Posted: March 26, 2015 at 10:45 PM

^^^^

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: jorgefdz
Date Posted: March 27, 2015 at 8:43 AM

Thanks to all the people that take some time to reply my post.

I ending buying a another bypass/lock module.
I changed to OMEGA brand.. and wired W2W it was so easy and fast not as Xpresskit LOL.

Thank you again.!

-------------
J.F.L.L.