viper 5706, dball2, 2013 lexus es350
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138748
Printed Date: May 15, 2025 at 2:06 AM
Topic: viper 5706, dball2, 2013 lexus es350
Posted By: fastnite1
Subject: viper 5706, dball2, 2013 lexus es350
Date Posted: March 31, 2015 at 1:18 AM
I am currently putting a viper 5706 with a dball2 into a 2013 lexus es350 with push start button. I followed the diagram dball2 have provided. And install all require wire. Everything seems to work fine, except the remote start.
The problem-
--When trying to remote start, it seem to suceed but "virtually" then shut down after a minute with an error.
-- i tried the shut down diagnosis and it gave me 4 flashes.
Can someone tell me what's going on and if there's any solution??
Replies:
Posted By: tedmond
Date Posted: March 31, 2015 at 7:04 AM
Did you program tach prior to remote starting ?
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: fastnite1
Date Posted: March 31, 2015 at 8:37 AM
I did program the tach. I even tried hard wiring it. But still the same symptoms.
Posted By: tedmond
Date Posted: March 31, 2015 at 7:29 PM
are you sure it's 4 light flashes? 4 is shutdown by the transmitter. Verify the remote buttons are not stuck.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|