pulsed horn to constant output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138828
Printed Date: May 03, 2024 at 5:49 PM

Topic: pulsed horn to constant output

Posted By: stevemec
Subject: pulsed horn to constant output
Date Posted: April 16, 2015 at 1:35 PM

Hi All, need a little help.

I have programmed the auxiliary horn \ pager \ siren output wire of my vehicle alarm to pulsed output and connected it to the vehicles horn via a relay

now when the alarm is triggered, Ive now got the stock constant under bonnet siren + very loud beep....beep....beep horn.

I have added another siren + strobe inside the vehicle but need this fed with a constant feed

Anyone know what is that best way of doing this ?

Thanks

Replies:

Posted By: i am an idiot
Date Posted: April 16, 2015 at 3:56 PM

https://www.the12volt.com/relays/relaydiagram22.html

Print Page | Close Window