2015 Honda Odyssey PTS
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138903
Printed Date: May 01, 2024 at 10:03 PM
Topic: 2015 Honda Odyssey PTS
Posted By: berto1230781
Subject: 2015 Honda Odyssey PTS
Date Posted: April 27, 2015 at 4:34 AM
Hello guys I'm wanting to install a simple keyless entry/remote start in this car and I would like to know what's everybody using for a bypass module? I would like to use a module that once remote start and u open a door the vehicle will not turn off.I'm not an installer I'm doing this in my garage. I have used for tin bypass before but with the firmware u have to put in it will shut down the car once a door is open. I have looked at I data link but to finish the programing I need a ads-USB is that correct?? Any help would be great thanks
-------------
roberto gonzalez
Replies:
Posted By: howie ll
Date Posted: April 27, 2015 at 9:15 AM
There's a thread on this vehicle just below, why don't you follow it?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: berto1230781
Date Posted: April 27, 2015 at 10:16 AM
I don't see the link or thred?? Can u guide me thanks
-------------
roberto gonzalez
Posted By: howie ll
Date Posted: April 27, 2015 at 10:17 AM
Try 7 down from you.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tedmond
Date Posted: April 27, 2015 at 11:54 AM
regardless of bypass brand they all shutdown upon door opening
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: berto1230781
Date Posted: April 27, 2015 at 1:31 PM
Oh OK thanks for the help guys. Quick question if u ground the door status wire will it prevent the car from shutting down once the door is open? door status on the bypass module. Anything I should know before I do the install any tips or tricks?? Thanks
-------------
roberto gonzalez
Posted By: Mike M2
Date Posted: April 27, 2015 at 5:00 PM
It will not work, the remote start makes the key code light come on when it remote starts and it has to turn off and be restarted to get rid of this every time.
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: berto1230781
Date Posted: April 27, 2015 at 8:52 PM
thnaks for the help guys. got another quetion what brand keyless enttry/remote system works best using the D2D method. and using witch bypass besides dball2 thanks howie
-------------
roberto gonzalez
Posted By: tedmond
Date Posted: April 28, 2015 at 6:19 AM
dball only works d2d with directed products. Fortin and idatalink work with all remote starters that support d2d (flashed appropriately). D2D has been great since most of not all bugs are worked out.
look into compustar or ultrastart
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: berto1230781
Date Posted: May 11, 2015 at 8:35 PM
thanks guys for the help. i have installed a fortin EVO-ONE in my 2015 honda odyssey PTS everything works good only one thing i would like to try to get around. once remote started by hittin lock 3x the oem remote becomes in active and i have to open the door with the key. i heard that u can add an rf kit to this module and program the oem remote to the EVO-ONE. i need help on finding an rf kit that will work with the EVO-ONE and that i can program my oem remote to it so that way once remote sart using oem remote i can use the oem remote to unlock doors. thanks alot for the help
-------------
roberto gonzalez
Posted By: pentavolvo
Date Posted: May 11, 2015 at 10:34 PM
Not gonna happen you can program an aftermarket remote to it though
Posted By: tedmond
Date Posted: May 11, 2015 at 11:07 PM
on the 15, the oem remote will never work when its running. You need the RF kit. A direct plug and play would be the compustar remote, but you need to turn on the RF function of the evo one. Make sure you have the programmer as well (flashlink v2)
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|