97 ford explorer alarm help asap

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13895
Printed Date: May 23, 2024 at 6:42 AM

Topic: 97 ford explorer alarm help asap

Posted By: AMANGILL
Subject: 97 ford explorer alarm help asap
Date Posted: May 23, 2003 at 12:51 PM

hi i am installing a blackwidow alarm and i hooked up the door trigger wire to the dome light and i think since the dome light is delayed the alarm keeps on tripping and also when the explorer's door handle is lifted the dome light goes on and it trips the alarm soo is there any solution to this problem cause i cant figure it out plz help thanks.

-------------
aman

Replies:

Posted By: trusdamanr
Date Posted: May 23, 2003 at 1:34 PM

you are gonna have to hool the alarm door trigger output the the door trigger wires, and diode isolate them ..... thats the only way

Posted By: Velocity Motors
Date Posted: May 23, 2003 at 11:08 PM

Use diagram # 1 in this link

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window