needed Compustar CS700-AS & Fortin EVO-ALL

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139068
Printed Date: May 09, 2025 at 1:20 PM

Topic: needed Compustar CS700-AS & Fortin EVO-ALL

Posted By: lucianm1971
Subject: needed Compustar CS700-AS & Fortin EVO-ALL
Date Posted: June 10, 2015 at 10:18 AM

Glad to know you guys! New on this forum and with a big problem. Bought a Fortin EVO-ALL and a Compustar CS700-AS for my 2010 Toyota Prius and cannot get them to communicate by D2D port. First installed EVO-ALL and everything is perfect. I can also remote start the car as it's one of the features provided by this. Anyway reprogramed EVO-ALL and used the schematics from Fortin site to connect the Compustar to it. Problem is that it does not work. Compustar & Fortin do not communicate. All wires in place but nothing. Tried all 3 modes on Fortin port - Fortin, APO and lastly D2D... nothing. What am I doing wrong?

Thank you all for your time reading this. Any help will be greatly appreciated.

Replies:

Posted By: tedmond
Date Posted: June 10, 2015 at 7:53 PM

cs700as does not support fortin through d2d, however you can set the fortin for idatalink and use the d2d. perform a reset of the evo-all, turn the idatalink option on, power cycle the cs700 and program the bypass.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: lucianm1971
Date Posted: June 11, 2015 at 1:40 AM

Thank you for you reply Ted, but as I said in the beginning I'm new to this, actually is my first attempt to mount this on a car by myself. Right now EVO-ALL is on AP Datlink/OFA Datalink as you can see in the attached picture. Wires are set like in Fortin schematics (attached). Only solid black on schematics wired. When I power the Compustar, EVO is not receving power through D2D... Do I have to wire all cables? Also the ones with dotted lines in schematics? Is an alarm/remote started that will successfully only the D2D port from Fortin and 2 - 3 wires to get the job done?

Best regards.

posted_image

Posted By: lucianm1971
Date Posted: June 17, 2015 at 8:32 AM

somebody?