Print Page | Close Window

Viper alarm aux

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139159
Printed Date: May 16, 2025 at 5:53 AM


Topic: Viper alarm aux

Posted By: paradox_108
Subject: Viper alarm aux
Date Posted: July 04, 2015 at 7:46 AM

Hi guys,

What I wanted to do is have my headlights turn on with lock/unlock and remote start.

If I set
Aux1 to latch with lock and unlock
Aux2 to latch with remote start

Can I just diode isolate these aux1 and aux2 to achieve what I want?



Replies:

Posted By: howie ll
Date Posted: July 04, 2015 at 8:38 AM
Suggest timed, otherwise you'll quickly have a drained battery.
But yes diode block, 1N4004 band to Viper will be fine.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.


Print Page | Close Window