Crimestopper SP402 & DBALL D2D?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139206
Printed Date: May 16, 2025 at 7:14 PM

Topic: Crimestopper SP402 & DBALL D2D?

Posted By: shadowinfector
Subject: Crimestopper SP402 & DBALL D2D?
Date Posted: July 18, 2015 at 9:51 PM

Can i use DBALL Data to data port on the Crimestopper?

or does this need to be W2W?

Replies:

Posted By: mpe235
Date Posted: July 19, 2015 at 6:22 PM

Based on the information that i can find it looks like the crimestopper is compatible with idatalink and fortin.
It doesn't show that is d2d compatible with the dball.
The fortin evo all is a very similar product and can interface with all of the d2d protocols.

-------------
Nissan Master Tech.

Posted By: kreg357
Date Posted: July 19, 2015 at 8:17 PM

+1 with mpe235

SP402 Programming
7. DATA PORT PROTOCOL: Default = EVO / SL Series
This option controls the Data Port Protocol for ADS / OFA Series modules or EVO / SL Series modules. The default
is set for EVO / SL Series Protocol. This option has no effect on conventional wiring of Bypass modules. Both Data
Protocols are 2-Way communication.

You can go W2W with the DB-ALL...

-------------
Soldering is fun!

Print Page | Close Window