2001 4Runner Compustar CM800-S Keysense
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139373
Printed Date: May 09, 2025 at 9:38 PM
Topic: 2001 4Runner Compustar CM800-S Keysense
Posted By: kxed
Subject: 2001 4Runner Compustar CM800-S Keysense
Date Posted: August 31, 2015 at 7:41 AM
Im installing a Compustar CM800-S into a 2001 4Runner auto with no immobilizer non factory alarm just keyless entry. The CM800-S does not have a keysense wire what should I use..
Replies:
Posted By: chev104275
Date Posted: August 31, 2015 at 9:37 AM
If there's no factory alarm you shouldn't need to use keysense.
-------------
If i Can't Install it I Don't need it Joe
Posted By: howie ll
Date Posted: August 31, 2015 at 10:23 AM
If you find you need keysense for instance remotes won't lock unlock during remote start, then use a GWR or status wire.
That said Chev is probably correct.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: chev104275
Date Posted: August 31, 2015 at 1:08 PM
Good point about the remotes Howie. I always do a starter/keyless combo. So the customer only has to carry one remote
-------------
If i Can't Install it I Don't need it Joe
Posted By: howie ll
Date Posted: August 31, 2015 at 1:12 PM
Here in the UK, Hondas and Toyota, I always seem to need to wire keysense.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|