Install Remote Starter, 2003 Honda Pilot
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139423
Printed Date: September 11, 2025 at 4:41 PM
Topic: Install Remote Starter, 2003 Honda Pilot
Posted By: goofy1953
Subject: Install Remote Starter, 2003 Honda Pilot
Date Posted: September 12, 2015 at 3:15 PM
Hi,
I just install the Python 4806P 2 way remote stater on 2003 Honda Pilot.The labor cost $150.When the job done,there is no hood pin switch,valet switch.Beside in installation guide mention about Neutral safety switch which he didn't install.I don't think he do the job done
right.Do I?
Replies:
Posted By: howie ll
Date Posted: September 12, 2015 at 4:50 PM
Go back and complain. Hood pin switch is mandatory. I always lose the neutral safety no one asks for it. As long as the black white goes either to a parking brake switch (manual) or ground (auto) it's OK.
Valet switch is in the antenna.
PS Have you tested for a hood pin, i.e. leave the hood open if it still starts you're right there isn't one.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|