Print Page | Close Window

Crimestopper remote start with DBALL2?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139444
Printed Date: July 05, 2025 at 8:21 AM


Topic: Crimestopper remote start with DBALL2?

Posted By: 2001eclipse
Subject: Crimestopper remote start with DBALL2?
Date Posted: September 17, 2015 at 5:39 PM

A friend of mine already has a Crimestopper remote start system but the remote start part of it isnt installed yet, so basically he just has keyless entry. Im not too familiar with all the fancy bypasses and what not, but he bought a DBALL2 and I was wondering if it was possible to use the DBALL2 for just the transponder bypass? Or do I have to remove his alarm, and wire the alarm to the DBALL2? Any info will be much appreciated! TIA



Replies:

Posted By: 2001eclipse
Date Posted: September 17, 2015 at 5:48 PM
Oops forgot to mention the car is a 2004 Acura TSX




Posted By: bighomie313
Date Posted: September 18, 2015 at 7:36 AM
From the XPRESSKIT website, your friend can do the following with the DBALL2:

posted_image

Transponder bypass with that is possible according to the manual for that particular firmware:

posted_image

He can find out more by going to the xpresskit.com website and looking at the documentation for his car.





Print Page | Close Window