Disarm Viper 5701 with factory remote?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139453
Printed Date: May 02, 2024 at 10:09 AM
Topic: Disarm Viper 5701 with factory remote?
Posted By: MJA1962
Subject: Disarm Viper 5701 with factory remote?
Date Posted: September 19, 2015 at 11:33 PM
Hello,
I have a Viper 5701 installed in a 1998 Lincoln Mark VIII. The car has a factory keypad on the driver's door, plus I also have the original factory keyless entry remotes. Is there any way to disarm the 5701 using either of these devices?
Thanks in advance,
Mike
Replies:
Posted By: howie ll
Date Posted: September 20, 2015 at 8:58 AM
No.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: September 21, 2015 at 5:00 AM
Well you could take a 1 way remote, then wire across the arm and disarm switches with relays from the OEM lock unlock wires. Good luck with that though.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: MJA1962
Date Posted: September 23, 2015 at 12:57 PM
Thanks for the creative workaround. I was hoping that there was some standard way to do this. It'd be handy if it was possible.
|