Python remote start error after new battery

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139468
Printed Date: May 09, 2025 at 11:57 PM

Topic: Python remote start error after new battery

Posted By: mohpro
Subject: Python remote start error after new battery
Date Posted: September 23, 2015 at 8:42 PM

I put a new battery in my car. After soing so, my car would not start with my python 4206 remote start. Using the shut down diagnostics, i get 4 LED flashes, which is "transmittor shut down or optional push button". It was working fine before I put the new battery in. Can anyone help guide me what to check, or how to fix the problem?

Replies:

Posted By: mohpro
Date Posted: September 26, 2015 at 2:58 PM

I fixed it. I reset the virtual tach and it works fine now

Print Page | Close Window