Perimeter Sensor in Jeep

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13952
Printed Date: July 13, 2025 at 12:32 AM

Topic: Perimeter Sensor in Jeep

Posted By: tnjeepguy31
Subject: Perimeter Sensor in Jeep
Date Posted: May 24, 2003 at 10:18 PM

I'm looking for suggestions on where to install a doppler radar perimeter sensor in a jeep wrangler......Reply here or email me at TnJeepGuy31@aol.com

-------------
me

Replies:

Posted By: completeaudio
Date Posted: May 24, 2003 at 10:28 PM

try to centralize it as much as possible... this will keep the protection area even. Try right between the seats hidden under carpet or the rubber matting found in most jeeps.

-------------

Posted By: tnjeepguy31
Date Posted: May 24, 2003 at 10:45 PM

Thank you...it has screw tabs on both sides. Should I hard mount it to the floor with sheet metal screws or just leave it lying under the carpet?

-------------
me

Posted By: completeaudio
Date Posted: May 24, 2003 at 11:11 PM

before permantly mounting i would start messing around with and make sure that you find the best location... be sure to check underneath anytime your screwing into the floor and if in doubt then just use some double sided tape or velcro.

-------------

Print Page | Close Window