Elantra 2010 GLS. Viper 5706V Alarm only.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139564
Printed Date: May 13, 2024 at 11:07 PM
Topic: Elantra 2010 GLS. Viper 5706V Alarm only.
Posted By: b7777777
Subject: Elantra 2010 GLS. Viper 5706V Alarm only.
Date Posted: October 12, 2015 at 7:20 PM
Hi.
Need some help installing Viper 5706v, no remote start cuz don;t really want to tamper with start just yet. I saw this thread, but OP is installing remote starter with no immobilizer.
My elantra has immobilizer for sure. So any tips? I will start looking into the schematics this week and hopefully post.
If it is preferred I follow the thread below, please let me know.
Cheers.
https://www.the12volt.com/installbay/forum_posts.asp?tid=137012
Replies:
Posted By: howie ll
Date Posted: October 13, 2015 at 4:01 AM
If you're not installing as a remote start you won't need to worry about the immobiliser. If you do then look at a DBALL2.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: b7777777
Date Posted: October 22, 2015 at 9:20 PM
Thanks. Working on the interconnection now on excel spreadsheet. Will post before I go ahead and wire up. I just noticed that there is only two 'ports' for the sensors. Is there a way to add a third one? The viper comes with a shock, and I have bought the glass break and tilt sensors. Would be a shame if I don't use it all. Cheers
Posted By: howie ll
Date Posted: October 23, 2015 at 12:52 AM
Tilt is not wired to a port, use blue trunk, H2 diode separated if that trigger is used, to tilt blue, orange, H1 to tilt black, red H1 to tilt red.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: b7777777
Date Posted: October 23, 2015 at 8:06 PM
thanks. I have to run to the store and buy myself a diode separater,1N4004 I'm guessing.
Posted By: howie ll
Date Posted: October 24, 2015 at 6:31 AM
Yes.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|