dball2 RSR install Audi Q3 PTS
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139615
Printed Date: May 10, 2025 at 4:23 AM
Topic: dball2 RSR install Audi Q3 PTS
Posted By: itsu_o
Subject: dball2 RSR install Audi Q3 PTS
Date Posted: October 25, 2015 at 7:11 AM
Hi all
I already installed dbal2l as RSR to Audi Q3 2015 4 times.
Yesterday I worked with Q3 2015 which is same spec as I installed two weeks ago.
Installation Type is 2.
all wiring is ok. but won't remote start.
If i place key fob with battery, It works. so just Immo problem.
I did both method 5 and 6. checked with 3 key fobs.
Car information display said key in not in car when remote start.
I checked wire again and again but nothing looks wrong.
Now I have no idea, nothing to do.
anybody here had same problem?
dball2
FW : VW02 RSR 3.83
Replies:
Posted By: howie ll
Date Posted: October 25, 2015 at 8:02 AM
Just for a laugh, go to Directechs, click the US flag, select Europe and download the slightly different software for the European A3.
Follow the key wrap procedure EXACTLY, if it says 4-6 wraps then neither more nor less.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|