XK01 User Settings

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139656
Printed Date: May 17, 2025 at 1:44 PM

Topic: XK01 User Settings

Posted By: jpinusmc
Subject: XK01 User Settings
Date Posted: November 02, 2015 at 8:29 PM

I've installed a Viper 5706v with XK01 (AMDL) in my 03 Tahoe. The XK01 is connected D2D.

Remote start and locks work correctly. I am trying to get the window up feature to work, and this is where I run into problems.

I go into programming mode, and can switch between the different modes, but I cannot change between option 1 and 2 using the viper remote. Ive re-flashed the unit multiple times and even re-flashed with a different firmware and went back to the AMDL and still nothing.

Any ideas?

Print Page | Close Window