Print Page | Close Window

5906v Activation input on a Ram C/V

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139674
Printed Date: May 20, 2025 at 12:54 AM


Topic: 5906v Activation input on a Ram C/V

Posted By: v.e.dynamics
Subject: 5906v Activation input on a Ram C/V
Date Posted: November 05, 2015 at 3:56 PM

I have a 2015 Ram C/V (Dodge Caravan) and would like to use the factory Fob for remote start and shutdown. Right now I can use it for R/S but once it starts I cant't shut it down with lock button on the fob. Any help would be appreciated.

-------------
DC-MD-VA



Replies:

Posted By: davep.
Date Posted: November 05, 2015 at 5:13 PM

I've never done this. I offer it as food-for-thought.

Program the 5906 for 2-pulse activation on the wht/blu activation wire.

Connect activation wire to LOCK motor or signal in Caravan. Use relay to invert trigger if necessary.

2X lock activates RS. 2X lock again deactivates RS. Vehicle remains locked. IF the caravan RKE functions with a running engine (some vehicles don't) this would allow you to stop and start with the LOCK fob button, and unlock to get in it while it is running on RS. If you lock the Caravan with the fob, you can only push the button once.

 

EDIT: I read your post again. I don't fully understand "I can RS it with the remote, but once running I can't shut it down with LOCK". So you already have it connected to the LOCKs? And once it's running the factory fob doesn't control the locks any more? Many cars function this way. I don't know what the work around is, other than a stand-alone fob for the RS.


Print Page | Close Window