Bulldog cl-200 help please
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13969
Printed Date: July 07, 2025 at 10:40 PM
Topic: Bulldog cl-200 help please
Posted By: jb03
Subject: Bulldog cl-200 help please
Date Posted: May 25, 2003 at 1:23 PM
I recently purchased this window roll up module but the diagram doesnt say which wires are for up and down. It's a bulldog cl-200 module and the leads are blue and green for one switch and blue/white and GREEN / WHITE for the other. I'm just afraid if I hook these up backwards there may be smoke. Help would be greatly appreciated. TIA JB
Replies:
Posted By: solarcrew
Date Posted: May 25, 2003 at 1:40 PM
Go to the accessories section of car security.It has a diagram of a window module hook-up.Plus I think you will use the solid green and green-white for 1 switch and solid blue and blue-white for the other instead of green-blue for 1 and grn-whte,blue-white for the other.I'm not an installer but logic says go grn-grn,blu-blu.Maybe 1 of the pro's will jump in.Good luck!
Posted By: solarcrew
Date Posted: May 31, 2003 at 8:59 PM
jb03,did you every get it working?
Posted By: jb03
Date Posted: June 01, 2003 at 8:28 AM
Ya I got it working and it works well thanks for all of your help and suggestions. TY
|