RS can’t unlock/lock while engine is running
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139829
Printed Date: May 12, 2025 at 10:00 PM
Topic: RS can’t unlock/lock while engine is running
Posted By: vincen
Subject: RS can’t unlock/lock while engine is running
Date Posted: December 02, 2015 at 6:43 AM
I've recently installed a viper 4806v in my 2010 honda pilot using Idatalink ADS-ACLA. Everything is working except for a strange issue. If the car is running the lock/unlock function of the RS will not effect it. I can hear the brain clicks like it should but the lock remain unaffected. However, if the car was running as the result of a pit stop (car running, remote start button on remote is pressed and key removed, car remain running), the lock/unlock function works like it was supposed to. Anybody experience this before?
Replies:
Posted By: rs specialist
Date Posted: December 02, 2015 at 9:42 AM
try programming the remote start for double unlock pulse.
Posted By: beegbie
Date Posted: December 02, 2015 at 7:29 PM
Hardwire or dbi? If hardwired, did you hook up the BLACK/ white +starter input to the alca?
Posted By: vincen
Date Posted: December 03, 2015 at 12:17 AM
rs specialist wrote:
try programming the remote start for double unlock pulse.
Thanks. This will probably work if the rs was lock/unlock wires were connected to the car instead of the ACLA. I tried it anyway without any luck.
Posted By: vincen
Date Posted: December 03, 2015 at 12:20 AM
beegbie wrote:
Hardwire or dbi? If hardwired, did you hook up the BLACK/ white +starter input to the alca?
It is hardwired. Currently that wire is not connected to anytime. The only +starter output on the RS is wire #5 of the 8 heavenly gauge wires. I'm supposed to splice the ACLA into that?
Posted By: beegbie
Date Posted: December 03, 2015 at 4:27 AM
vincen wrote:
beegbie wrote:
Hardwire or dbi? If hardwired, did you hook up the BLACK/ white +starter input to the alca?
It is hardwired. Currently that wire is not connected to anytime. The only +starter output on the RS is wire #5 of the 8 heavenly gauge wires. I'm supposed to splice the ACLA into that?
Yes, it's in the guide for a reason. It's what tells the alca to switch from sending factory keyless data to can data for door locks.
Posted By: vincen
Date Posted: December 04, 2015 at 2:00 PM
beegbie wrote:
vincen wrote:
beegbie wrote:
Hardwire or dbi? If hardwired, did you hook up the BLACK/ white +starter input to the alca?
It is hardwired. Currently that wire is not connected to anytime. The only +starter output on the RS is wire #5 of the 8 heavenly gauge wires. I'm supposed to splice the ACLA into that?
Yes, it's in the guide for a reason. It's what tells the alca to switch from sending factory keyless data to can data for door locks.
Do you accept e-hugs? b/c you're about to get one right now! Turned out I did have that hooked up, but to a -starter output. Corrected it to what you suggested and it now works like a charm! thank you thank you!!! Now I can finally stop having to manual unlock it with a key!
Posted By: beegbie
Date Posted: December 04, 2015 at 7:38 PM
Great job, happy to hear you got it working.
|