Honda Accord 2009 Factory Disarm/unlock Problem.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139850
Printed Date: May 10, 2024 at 2:07 PM

Topic: Honda Accord 2009 Factory Disarm/unlock Problem.

Posted By: kulblue
Subject: Honda Accord 2009 Factory Disarm/unlock Problem.
Date Posted: December 05, 2015 at 9:23 AM

Hi, Everyone. New here...

I had Avital 4111 and PKALL and Works fine on factory disarm/unlock. I used double pulse relay. I decided to replace my Avital 4111 to Avital 5303L . After installed the wires everthing and tried. Works remote start, trunk release and arm lock but the unlock didnt work unlock. I dont no way why doesnt work. Pls! Someone can help me. Thanks!

Replies:

Posted By: kulblue
Date Posted: December 07, 2015 at 10:23 AM

bump.

Posted By: beegbie
Date Posted: December 11, 2015 at 7:43 PM

I'm guessing the reason why no one has responded is because your original post is confusing. "I used double pulse relay" doesn't make sense. What wires in the car are you connected to? what wires from the 5303 are used?

Posted By: kulblue
Date Posted: December 26, 2015 at 5:53 PM

I got it fixed.. I replaced the pkall to dball2. Works fine now..

Print Page | Close Window