Viper 4105V Transmitters Function Differently

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139860
Printed Date: May 15, 2025 at 9:56 AM

Topic: Viper 4105V Transmitters Function Differently

Posted By: needabeer
Subject: Viper 4105V Transmitters Function Differently
Date Posted: December 06, 2015 at 6:07 PM

I just installed a Viper 4105V into my 2003 Honda Element using a PKALL. Everything works as it should except my transmitters. I have the 4105 programmed to honk on lock/unlock and RS to activate after two button presses. One transmitter does just that, the other unlock/locks with no honk and activates RS on one press. I reset the transmitters within the 4105 and reprogrammed only to have it function the same. Any ideas? Thank you.

Replies:

Posted By: rs specialist
Date Posted: December 07, 2015 at 11:29 AM

If you have a bit writer, you can change the remotes to act differently from each other. You may need to change the save to remote 0 instead of 1-4

Posted By: needabeer
Date Posted: December 07, 2015 at 12:31 PM

I do have a bitwriter, so I will look into that. Thanks.

Print Page | Close Window