Horn output
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139861
Printed Date: May 05, 2024 at 3:46 AM
Topic: Horn output
Posted By: robgt22
Subject: Horn output
Date Posted: December 06, 2015 at 9:13 PM
Good night everybody, so I installed an aftermarket keyless entry, but it doesn't have any output, no horn, lights, anything. I wanted to wire the lights so I'll know when the system locks and unlocks, any idea on how to convert the changing polarity from the actuators to a constant +12v?
-------------
Rob
Replies:
Posted By: rs specialist
Date Posted: December 07, 2015 at 11:28 AM
We are going to need more information. what kind of vehicle, what kind of system is installed, what is hooked up?
Are you needing to change the output of the system from a negative to positive output? if so you can do a search on here for relays and it will show you how to wire in a relay to do that.
Posted By: robgt22
Date Posted: December 07, 2015 at 10:41 PM
Vehicle is a 95 Honda passport. The keyless entry system is aftermarket but its cheap. The controller itself doesn't have an output for horn or lights, the only way I could do it is from the actuator lines, that are two wires that constantly change polarity to make the actuators work. Is it a way to get an output from that line?
-------------
Rob
|