Print Page | Close Window

Need Help with learning remote programing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13987
Printed Date: July 05, 2025 at 8:19 AM


Topic: Need Help with learning remote programing

Posted By: Mizouse
Subject: Need Help with learning remote programing
Date Posted: May 25, 2003 at 11:27 PM

A couple of years ago I purchased a 96 Oldsmobile Cutlass Supreme.  It came with a TRC 90-92C "Premium Auto Security System" already installed.  Great.  So a couple of weeks ago one of my remotes starts going crazy and has since broken.  Now the remaining remote is starting to go crazy.  I ordered 2 new remotes from the company and now have to program them.  As I understand it from the alam manual they are learning remotes, however, the replacement remotes came with no information at all and the alam manual does not give any info on how to program them past how to enter the code learning mode.  I need help teaching the codes to the remotes.  All they do are:  button 1 - arm/disarm alarm (lock doors, ignition kill, flash lights, etc... basic alarm stuff)  button 2 - pop trunk.  Any help would be greatly appreciated.



Replies:

Posted By: Mizouse
Date Posted: May 25, 2003 at 11:29 PM

After re-reading I guess I should say"  All they NEED to do, not all they do. 





Print Page | Close Window