08 Accord trunk release problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139937
Printed Date: May 10, 2025 at 12:15 AM

Topic: 08 Accord trunk release problem

Posted By: sgarcia1212
Subject: 08 Accord trunk release problem
Date Posted: December 12, 2015 at 9:43 PM

Hi,
I have installed a Python 5206p remote start with DBALL2 on an 08 Accord.
Everything is working correctly except the trunk release.

Trunk doesn't release while the remote start is running.
It works correctly when the remote start is not running.

Currently the trunk is controlled via D2D.

Can someone help me correct this problem?

Thanks in advance. posted_image

-------------
SGARCIA1212

Replies:

Posted By: triniforever
Date Posted: December 12, 2015 at 10:36 PM

The bypass module is duplicating the way the car functions with the key when the car is running the trunk pop button on the factory remote probably does not work either ,if you want the trunk release to function during remote start it needs to be hardwired to the car from the remote starter and on this car its an orange wire low in the drivers kick and its a + so you will need a relay because the trunk release on most remote starters are usually a negative .

-------------
triniforever

Posted By: sgarcia1212
Date Posted: December 13, 2015 at 6:52 PM

Thanks triniforever.

-------------
SGARCIA1212

Print Page | Close Window