2010 Escape/Evo all/Viper 4105

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139942
Printed Date: May 11, 2025 at 6:48 PM

Topic: 2010 Escape/Evo all/Viper 4105

Posted By: ziggyb222
Subject: 2010 Escape/Evo all/Viper 4105
Date Posted: December 13, 2015 at 12:14 PM

Doing a 2010 Escape right now... Parklights says PURPLE / wht drivers running board... Found a wire that test only about 9 to 10 volts when the switch is turned on... Not a full 12 volts.. It does have auto lights.... Any ideas or solutions for the park lights????

Replies:

Posted By: rs specialist
Date Posted: December 15, 2015 at 12:09 PM

I always grabbed mine in the rear drivers side door sill plate as it is coming from the passenger side of the vehicle. There are multiple wires of that color, so test to be sure you have the correct one.

Posted By: ziggyb222
Date Posted: December 15, 2015 at 1:45 PM

Thanks... I grabbed it at the BCM... Door sill would be better...Lol!!!!

Print Page | Close Window