2007 impala, dball rsr
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139952
Printed Date: May 03, 2024 at 8:04 PM
Topic: 2007 impala, dball rsr
Posted By: emceescottyp
Subject: 2007 impala, dball rsr
Date Posted: December 14, 2015 at 10:34 AM
I have a 2007 Impala with a DBALL 2 installed RSR that has functioned fine for a couple years. It just quit working although the lock functions are working. I checked the module and see that the dball 2 is sending the signal as well as a relay clicking as if to start the vehicle. All light flashes indidcate the dball 2 is working but the car will not start. I reflashed the module as well as flash and install a seperate dball2, same results. Is there something in the cars computer that could have shut down?
Replies:
Posted By: rs specialist
Date Posted: December 15, 2015 at 12:06 PM
do you have any dash lights on in the vehicle? Doesn't that have diagnostics on it as well?
Posted By: emceescottyp
Date Posted: December 16, 2015 at 6:56 AM
Yes I found there is a check engine light on. I have the Impala wired and flashed for RXT because it had a remote start already. The factory remote start disables itself if there is a check engine light . That code has to be cleared before it will work properly again.
Posted By: emceescottyp
Date Posted: January 04, 2016 at 9:08 AM
Ok I have the check engine light reset and cleared. Currently the vehicle will start with the factory FOB and about 8 feet away. The dball2 will flash the correct sequence of the LED indicating it is trying to start. The car will not start still, any help please.
|