Print Page | Close Window

2016 Nissan Rogue PTS Remote Start Key Wrap

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139971
Printed Date: May 13, 2025 at 5:22 AM


Topic: 2016 Nissan Rogue PTS Remote Start Key Wrap

Posted By: shadowinfector
Subject: 2016 Nissan Rogue PTS Remote Start Key Wrap
Date Posted: December 18, 2015 at 9:25 PM

Installaing an Avital 4103 with DBall2....everything is wired correctly.....i think my key wrap the issue.
Remote start works when kkey fob is in vehicle.

Ive tried switching keys and wrapping different ways with no luck.

Removed back cover and exposed coil, wrapped the brown wire from dball 2 as best as a i can as pictured and taped to hold. then connected to the yellow/red wire which connects to the car side of key loop.

Anyone have a picture of this thing is suppose to be wrapped??

Any tips would be greatly appreciated. thanks





Replies:

Posted By: Mark Mizenko
Date Posted: December 18, 2015 at 10:27 PM
Wrap your loop 5 or 6 turns, loosely around your pinkey finger, lay it flat on the big coil/loop at the top of the board in the fob


Print Page | Close Window