Auto page door lock reversed when running
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139979
Printed Date: May 15, 2025 at 6:16 AM
Topic: Auto page door lock reversed when running
Posted By: mcculleb
Subject: Auto page door lock reversed when running
Date Posted: December 20, 2015 at 12:00 PM
Hello
Just installed an Autopage RS-730A with an Idatalink ads-alca module into a 2011 Honda CRV.
Everything is working correctly exempt for when I remote start it. After starting, the door unlocks and stays unlocked. The remote still shows it as locked. When I hit unlock, the doors lock and the remote shows lock. When I hit lock, they unlock and the remote shows locked. After shutting down the vehicle, proper operation resumes. Is there a setting that I am missing to fix this?
Thank you.
-------------
Brian McCullen
Replies:
Posted By: dairyboy3
Date Posted: December 20, 2015 at 12:20 PM
Sounds like the module is disarming the factory alarm upon remote start and not re arming after it starts. You can change that in the module settings on the computer if you are using the ads-alca for transponder bypass and door locks.
Posted By: mcculleb
Date Posted: December 20, 2015 at 12:29 PM
Thank you! I will look into this tonight and get back with the results.
-------------
Brian McCullen
|