98 camry wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139980
Printed Date: May 15, 2025 at 12:01 PM

Topic: 98 camry wiring

Posted By: kkpt
Subject: 98 camry wiring
Date Posted: December 20, 2015 at 1:11 PM

Happy Sunday All,

I am KPT, new to this forum. Finding it interesting.
I am wiring a Xpresskit PKALL bypass module to my 98 XLE v6. I am doing this to wire my prostart remote starter using this bypass module.

the bypass module's diagram has few wires to connect to CLK, DATA and SYNCHRO wire from the ignition Barrel. the colour of wires as specified in the manual does not match to what is on the car.

Requesting any help that might guide to identify these wires

Thank you all, and Happy last minute shopping

KPT
kitchener, Ontario

-------------
KPT

Replies:

Posted By: kreg357
Date Posted: December 20, 2015 at 3:31 PM

Here is the transponder connector wires from iDatalink :
AMP       pin 1   BLACK / YELLOW (DATA) @ Ignition switch
Code      pin 2   GREEN / WHITE (DATA)              @ Ignition switch
RXCK    pin 3    RED / Blue (DATA)       @Ignition switch
TXCT     pin 4   Blue / YELLOW (DATA)    @ Ignition switch
Ground   pin 5 WHITE/ Black (-) @ Ignition switch

Of course they give the wires different names, but...

-------------
Soldering is fun!

Posted By: kkpt
Date Posted: December 20, 2015 at 7:59 PM

Thank you. Is there a way to identify by measuring volts or by tracing where it is?

Kpt

-------------
KPT