Viper Install 93 Chevy K2500 6.5 diesel
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140000
Printed Date: May 02, 2024 at 5:20 AM
Topic: Viper Install 93 Chevy K2500 6.5 diesel
Posted By: jim93
Subject: Viper Install 93 Chevy K2500 6.5 diesel
Date Posted: December 23, 2015 at 9:48 AM
Hi all,
This is my first remote start install and I have a few questions. I have searched the forums and have not gotten a clear answer yet. I am installing a Viper 4706v in my 93 chevy K2500 6.5 Turbo diesel. So far, I have the remote start working as well as the turbo timer. I am now working on the locks. Am I correct in assuming that I need relays for both the lock and unlock function? At this time the locks are the only other thing that I am planning on hooking up. Any other comments or suggestions would be appreciated.
Thanks in advance, James
Replies:
Posted By: dairyboy3
Date Posted: December 23, 2015 at 3:48 PM
Some trim levels are positive polarity door locks on that year but most of them are 5wire. If its 5 wire get a 451m or use two relays and follow the diagram on this website.
|