Valet 561t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140001
Printed Date: May 14, 2024 at 1:45 AM

Topic: Valet 561t

Posted By: quadtro
Subject: Valet 561t
Date Posted: December 23, 2015 at 11:24 AM

My brother has a valet 561t on his Toyota fj.. However when the RS is activated he can't unlock the car via the remote. He needs to use the key to unlock the door and once the door is opened the remote start shuts down. He bought the car with the 561t already installed. Any idea what I should be checking for prior to tearing into his dash? Is it just a programming issue, if so how do I program it?

Thx

Replies:

Posted By: howie ll
Date Posted: December 23, 2015 at 12:23 PM

There should be a blue wire on a 4 pin plug, GWR AKA status out put. If unused connect to the key sense wire adjacent to the ignition switch. This is a wire often BLACK / YELLOW (give me the year I can be more precise) which goes from open circuit to ground when the ignition key is inserted.
If this is already used for say a factory immobiliser by-pass then split via diodes (2 X 1N4004). Bands towards the 561t.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: quadtro
Date Posted: December 23, 2015 at 2:58 PM

FJ is a 2007. TRD Ed if that matters.

Thx

Posted By: howie ll
Date Posted: December 24, 2015 at 12:45 AM

GREEN/ YELLOW, body ECU on R edge of dash fuse box, top white 26 pin plug, pin 14.
And yes year is extremely important, colours and positions may change.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.