CM5200 Issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140394
Printed Date: May 10, 2025 at 3:57 PM

Topic: CM5200 Issue

Posted By: golfita
Subject: CM5200 Issue
Date Posted: December 25, 2015 at 5:31 PM

Hey guys,

I have an '02 Corolla with an CM5200 in it.
This morning the remote start didn't start the care, just crancked it and because of the cold and not plugging the car in over night it didn't start. I started it with the key and after I came back home when I locked the car with the remote I saw that the lights didn't blinked but the doors locked. tried to start it from remote but nothing happened. So it locks/unlocks but lights don't come on anymore and it does not start the car, not even crancking. Checked the 2 fuses under the dash on the wiring and they are good. Any ideas?
Thank you!

Replies:

Posted By: kreg357
Date Posted: December 25, 2015 at 7:17 PM

Yes, you are in Valet Mode. The locks working but the Parking Lights not confirming is the give-away. If you have the 4 button remotes, press Lock and Start at the same time while the ignition is ON.

-------------
Soldering is fun!

Posted By: golfita
Date Posted: December 25, 2015 at 9:42 PM

Thanks man! Worked! Only thing is that I had to press lock+trunk to get out of valet mode. Thanks again!!!

Posted By: kreg357
Date Posted: December 26, 2015 at 4:28 AM

Could be. The manual actually says buttons 1 and 3 so I guess it depends on the style of remote.

At least you're all set for the cold weather. posted_image

-------------
Soldering is fun!