Adding window module: 2004 Audi A4 factory alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140398
Printed Date: April 25, 2024 at 1:02 PM
Topic: Adding window module: 2004 Audi A4 factory alarm
Posted By: 2k2civic
Subject: Adding window module: 2004 Audi A4 factory alarm
Date Posted: December 26, 2015 at 4:56 AM
I'm looking to add a DEI 529T or 530T (I'm mostly concerned with the roll up function but I'll take both of i can get it) to my 2004 Audi A4. I'm just wondering if there's a wire I can tap into to control the window module or if I need to start getting creative on how to have it trigger.
Anyone ever done this before?
Replies:
Posted By: howie ll
Date Posted: December 26, 2015 at 9:07 AM
Easiest and cheapest, use a DEI 528t timer module, mount in driver's door, trigger from either lock, driver's door module, grey 32 pin, pin 10 PURPLE / blue NEG (-) wire.
Connect the output to driver door module, black 12 pin plug, pin blue/white (-). A lot easier to install than a 535 which you'd have to wire to each door and since the factory unlock is momentary you won't have the down facility.
I have one question, WHY??
You already have that facility on the factory key by either holding the lock button on either lock or unlock at least it's there on Euro models of that vintage.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|