Viper 5706v fob unlock issues
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140411
Printed Date: May 01, 2024 at 5:23 PM
Topic: Viper 5706v fob unlock issues
Posted By: jrhoover
Subject: Viper 5706v fob unlock issues
Date Posted: December 27, 2015 at 1:22 PM
For some reason my lock works fine my 2001 saturn sc2 does not ground side control the door locks like the viper does. I've wired in a relay the lock works fine by supplying a ground to the relay coil and locking the doors. But the unlock is reading around 6kohms not pushing the fob and when I push the unlock on the fob it goes completely open. There is not volatage with no buttons pushed and when pushed I get 1.9v. It is worthy to note my blue unlock wire was hooked to a 5v reference source when the unlock button was pushed. I had to wrong wire. I'm assuming ive smoked something inside the viper module for the unlock circuit? =[
|