Viper 5706V LCD Problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140447
Printed Date: May 06, 2024 at 12:16 AM
Topic: Viper 5706V LCD Problems
Posted By: 69-er
Subject: Viper 5706V LCD Problems
Date Posted: December 29, 2015 at 4:25 PM
Finally got the RS to work by installing the PKALL module. But now, the LCD remote wants me to push the FUNCTION button and then press the UNLOCK before it will accept commands. Usually it happens after a couple minutes or so after my last button press.
I recently found out how to set the clock so I'm sure I messed with the wrong setting at one point.
Any ideas?
Also, is there a place that details how to program the remote besides the clock? The only thing the installation manual shows is how to pair the remote.
Thanks!
Replies:
Posted By: howie ll
Date Posted: December 30, 2015 at 2:51 AM
Can't remember the Viper expression but I think your remote is in power save mode. Go to Viper.com and download the full owners manual.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 69-er
Date Posted: December 30, 2015 at 5:58 PM
Yep, you're right! I previously somehow put it in "Key Lock" mode.
I'll tell ya, it was like pulling teeth to find how to program these remotes. Can't figure why it's not explained in the any of the Viper manuals. Found the basics on how to maneuver around the menus on YouTube.
Thanks!
Posted By: howie ll
Date Posted: December 30, 2015 at 6:11 PM
Done it a 1000 times and still have problems. It's the way they explain it (badly) in the manuals around p. 24.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|