Viper alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140569
Printed Date: May 10, 2025 at 8:14 PM
Topic: Viper alarm
Posted By: voltamps
Subject: Viper alarm
Date Posted: January 04, 2016 at 12:35 AM
I have a Viper car alarm, and would like to figure out how to program it so it doesn't beep when I lock or unlock the doors.
Not sure if this is the right place. ..
Replies:
Posted By: voltamps
Date Posted: January 04, 2016 at 12:40 AM
The remote shows 479v, not sure if that's the model of the alarm or just the remote.
Posted By: smokeman1
Date Posted: January 04, 2016 at 7:55 AM
Go to Viper.com, support tab for owners guide for the Model 791xv. Pager 16 has info for programmable remote control features.
https://www.directeddealers.com/manuals/og/viper/G564V_07-05.pdf
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: voltamps
Date Posted: January 04, 2016 at 12:41 PM
smokeman1 wrote:
Go to Viper.com, support tab for owners guide for the Model 791xv. Pager 16 has info for programmable remote control features.
https://www.directeddealers.com/manuals/og/viper/G564V_07-05.pdf
Thank You!
Posted By: davep.
Date Posted: January 04, 2016 at 8:16 PM
This one I know from memory:
Open a door.
Turn ignition ON, then OFF.
Hold valet button until ONE beep. Release.
Push, release valet 2 times, then hold.
Should beep 2 times, LED should be flashing in groups of 2.
Push unlock on fob.
Should beep 2 times.
Release valet button.
Do nothing, and wait.
One long, one short beep. It's done.
Try it.
|