Alarmed Truck Accessory
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140582
Printed Date: April 27, 2024 at 8:29 AM
Topic: Alarmed Truck Accessory
Posted By: hilfiger8
Subject: Alarmed Truck Accessory
Date Posted: January 05, 2016 at 6:42 PM
Had someone ask me today if there is a way to have an alarm tripped if wiring is cut to a light bar. Is there anyone that can think of a way. Im coming up with a blank.
Thanks in advace
Replies:
Posted By: Ween
Date Posted: January 05, 2016 at 6:50 PM
directed 502T closed loop trigger module, but you'll need to add an additional wire to the light bar wiring.
Posted By: hilfiger8
Date Posted: January 05, 2016 at 7:01 PM
I appriciate the fast response, ive been trying to find a manual on the 502t with no luck. What would have to be added to light bar to make this work? Thanks
Posted By: Ween
Date Posted: January 05, 2016 at 7:23 PM
Per instructions..."(-) ground loop input. Run this wire through the object to be protected and then connect to chassis ground." So the additional wire could connect to ground inside the light if available, or just looped into the light then back to the vehicle chassis.
Posted By: howie ll
Date Posted: January 06, 2016 at 3:38 AM
Having similar problems here in the UK with M/Sprinter cats.
Use a DEI alarm with normal closed trigger inputs.
Run trunk or hood trigger with roof lights and ground it to a mounting bolt.
Set as normally closed.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|