Print Page | Close Window

2015 Jeep Wrangler Standard Transmission

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140607
Printed Date: May 29, 2024 at 4:24 AM


Topic: 2015 Jeep Wrangler Standard Transmission

Posted By: tribalhonda
Subject: 2015 Jeep Wrangler Standard Transmission
Date Posted: January 09, 2016 at 12:17 PM

Ive successfully installed a code alarm remote start on this Jeep and everything works great. Except im getting a trouble code with engine light every time I remote start the thing. My guy at the Jeep dealership says the code is saying something about the Clutch Switch.
I have the remote start in "STANDARD MODE" So you have to go thru the steps when you get out of the Jeep.
Can someone tell me specifically how to hook up the negative pulse wire from the remote start to the clutch switch to trick the computer into thinking all is ok?


Print Page | Close Window