Noob alarm, ungp s100
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140651
Printed Date: May 15, 2024 at 10:01 AM
Topic: Noob alarm, ungp s100
Posted By: dparrtech
Subject: Noob alarm, ungp s100
Date Posted: January 14, 2016 at 12:35 AM
Hey everybody, I have a quick question. I'm running an (ancient) ungo prosecurity s100 on my rock crawler. Everything was working fine, until, like an idiot, I bumped my antenna (was laying under the dash pad) and the wires knocked out of their plastic connector to the antenna. The wire appears to be a 4 pin connector at the brain, and a 4 pin connector at the antenna, with three wires. Is this a generic cable? I see a 4 pin/ 3 wire at
https://www.drdetailshop.com/543B.htm
Does this seem like a viable solution? Everything works fine and Id rather not replace the whole alarm and keyless entry (not factory power locks in my 83) if I can help it. Or am I pretty much SOL and need to pony up for a whole new system. If I do, any rough ideas on what that might set me back?
|